Jinfang
1 / 5
Acrylic sealant is a water-based environmentally friendly sealant, which is widely used in indoor construction and home decoration, and for bonding and sealing joints. It can also be used to trim indoor decoration gaps and repair wall cracks. In addition, this product uses a water-based formula, is odorless, green and environmentally friendly, and can be colored and painted.
Excellent adhesion to most surfaces.
Its long lasting flexibility allows continuous expansion and contraction without cracking or shrinking.
Easy to apply and compatible with most materials used in construction like concrete, wood, brick, natural and artificial stone, glass, metal and sanitary-ware.
Can be widely used for sealing gaps and cracks prior to painting; perimeter sealing around window frames, architraves, skirting boards, pictures and Chinese rails; internal corners of walls, cracks, joints and gaps where rigid fillers crack.
Can be used for joining & sealing a variety of building materials & construction elements that are likely to undergo moderate movement.
Suitable for repairs cracks in walls, skirting boards, doors & windows and seals between plasterboard panels, ceiling boards, cornices, decorative ceiling panels.
Surface Preparation: Remove grease, dust, moisture, or old sealant from the surface.
Nozzle Cutting: Cut off the top of the bottle neck and cut the nozzle at a 45° angle with a utility knife. The orifice diameter should match the width of the gap.
Installation and Application: Load the glue cartridge into the caulking gun and apply sealant continuously into the gap using steady pressure.
Curing: Acrylic sealant can be painted after drying, suitable for surface finishing.
Yes, it can be spray-painted or brushed over once fully cured.
Yes, we have white, black, gray, and more colors available. Customized colors can also be manufactured based on requirements.
Yes, once fully cured, it exhibits good resistance to moisture. However, it is not recommended for continuous underwater immersion or high-humidity areas like pools.
The surface will skin over within 10-20 minutes. Full curing typically takes 24 to 48 hours depending on temperature, humidity, and the depth of the joint.
Since it is a water-based environmentally friendly formula, any excess uncured sealant can be easily cleaned up with water and a damp cloth. Cured sealant must be removed mechanically.
Yes, it is highly compatible with typical construction materials including concrete, wood, brick, plasterboard, natural stone, glass, and metal.
